Capturing Video from a Digital Camera into Ulead

* Capturing the Video from the Camera *

Objective: To demonstrate how to capture video into Ulead from a digital camera.

Step 1: Connect the camera to the computer and turn it on. (See Job Aid – Connecting Camera)

Step 2: Open Ulead. The start screen will look like this.

Notice the three buttons on the upper left. Click on New Project. This will bring up the following screen.

Select the bottom template – AVI 320x240, 24 fps, Cinepak. This is the file type, display size, frame rate, and compression method. Click OK. You will then be taken to the Capture screen.

Step 3: Capture Screen:

(If your camera is hooked up properly, you should already (before clicking capture) be seeing what the camera sees in the preview screen.)

Notice the camera icon in the upper left hand corner. Clicking on it will start the capture of the video (video is being transferred to the computer). To stop capturing video, click the camera icon again or press escape.

Step 4: Saving Your Project.

After you have stopped capturing the video, Ulead will put a clip of the video on the right side of the preview screen. To save what you have done, click on Finish and select Save Project (you will find this selection on the left of the preview screen).