TECHNICAL REPORTS

• "Dynamic Analysis of New Impact Machine," submitted to the Central Foundry Division of General Motors, 1965.
• "Shaker-Computer System Instability," submitted to the Noise and Vibration Laboratory of the General Motors Proving Ground, Report No. PG-22051, 1965.
• Experimental and Theoretical Study of the Abnormal Knee Joint Mechanics," submitted to the Orthopaedics Division of the School of Medicine of The Ohio State University, June 1973.
• "Biomechanics of the Knee Joint; Comparatives Study of Natural and Prosthetic Knees," submitted to the V. Mueller Division of American Hospital Supply Corporation, June 1975.
• "The Effects of Flexion on the Length-Variations of the Ligaments of the Knee Joint," submitted to the V. Mueller Division of American Hospital Supply Corp., Sept. 1975.
• "Design and Evaluation of a New Anthropometric Dummy Neck," submitted to the Graduate School of The Ohio State University, March 1976.
• "Report for the Four Week Assignment under UNDP Project on Re-Transfer of Technology to Turkey," submitted to the United Nations, September, 1977.
• "Measurement of Resistive Torques in Major Human Joints," The Final Report (156 pages), December 1978, submitted to the U.S. Air Force, Air Force Systems Command, Aeronautical Systems Division, (AMRL-TR79-4).
• "Long Bone and Joint Response to Mechanical Loading," The Annual Progress Report (116 pages), May 1980, submitted to Air Force Office of Scientific Research (AFOSR).
• "Long Bone and Joint Response to Mechanical Loading," The Annual Progress Report (66 pages), May 1981, submitted to Air Force Office of Scientific Research (AFOSR).
• "Modeling of Human Joint Structures," The Final Report (176 pages), August 1981, submitted to the U.S. Air Force, Air Force Systems Command, Aeronautical Systems Division, (AFAMRL-TR-81-117).
• "Long Bone and Joint Response for Mechanical Loading," The Final Report (162 pages), November 1981, submitted to Air Force Office of Scientific Research (AFOSR).
• "Analysis of the Kinematic Properties Data of the Shoulder Complex During Forced Motion," The Final Report (59 pages), July 1982, submitted to the U.S. Air Force, Air Force Systems Command, Aeronautical Systems Division, (AFAMRL-TR-83-067).
• "Range of Movement in Major Human Joints with Special Emphasis on the Shoulder Complex and Its Mechanisms," The Final Report (69 pages), August 1983, submitted to the U.S. Air Force, Air Force Systems Command, Aeronautical System Division.
• "Passive Resistive and Damping Properties of Human Shoulder Complex," The Final Report (167 pages), November 1984, Submitted to the U.S. Air Force, Air Force Systems Command, Aeronautical Systems Division, (AFAMRL-TR-84-051).
• "Human Joint Articulation and Motion-Resistive Properties," The Final Report (189 pages), January 1987, submitted to the U.S. Air Force, Air Force Systems Command, Aeronautical Systems Division, (AAMRL-TR-87- 011).
• "Modeling of the Shoulder Complex for the Articulated Total Body (ATB) Model," The Final Report (37 pages), March 1992, submitted to the Systems Research Laboratories, Inc.
  
  I was also responsible for the conduct of the research and write-up of the indicated chapters or sections of the following reports.
• "The Human Body Under Time-Dependent Boundary Conditions," College of Engineering, The University of Michigan, Report No. 01279-1-P, Chapter III, pp. 48-67, 1968.
• "First Year Report - Annual Report on Contract PH-43-67-1136," Highway Safety Research Institute, The University of Michigan, Appendix F (22 pages), 1967.
• "Eighteen Month Report on Contract PH-43-67-1136," Highway Safety Research Institute, The University of Michigan, Appendix C (61 pages), 1968.
• "Twenty-four-Month Report on Contract PH-43-67-1136," Highway Safety Research Institute, The University of Michigan, Chapter III and Appendix A (35 pages), 1969.

---