Mechanical Engineering Transfer Plan (Mississippi Gulf Coast Community College)
This sample 4-year plan is designed as a guide for students planning to transfer from Mississippi Gulf Coast Community College.
- This information provides only a suggested schedule.
- Test scores are also to be considered in regards to math and science placement.
- Actual course selections should be made in consultation with an advisor.
- Associate degree requirements may include additional courses not on this plan as specified by the community college.
- Please refer to the major bulletin for general degree information and major requirements.
All course codes/numbers in year 1 & 2 are MGCCC course codes/numbers. Course codes/numbers in year 3 & 4 are University of South Alabama course codes/numbers.
Fall Semester - Year 1
| MGCCC Course Name | USA Course Name | Credit Hours |
|---|---|---|
| ENG 1113 | EH 101 - English Composition I | 3 |
| SPT 1113 | CA 110 Public Speaking | 3 |
| MAT 1613** | MA 125 Calculus I | 3 (USA 4) |
| CHM 1214 | CH 131/131L General Chemistry/Lab | 4 |
| History Elective | History Elective | 3 |
| Total | 17 |
Spring Semester - Year 1
| MGCCC Course Name | USA Course Name | Credit Hours |
|---|---|---|
| ENG 1123 | EH 102 English Composition II | 3 |
| GRA 1143 | ME 135 Engineering Graphics | 3 |
| MAT 1623** | MA 126 Calculus II | 3 (USA 4) |
| Social/Behavioral Elective | Social/Behavioral Elective | 3 |
| PHY 2514 | PH 201/201L Calculus-based Physics & Lab | 4 |
| Total | 16 |
Fall Semester - Year 2
| MGCCC Course Name | USA Course Name | Credit Hours |
|---|---|---|
| Literature Elective | Literature Elective | 3 |
| Social/Behavioral Elective or History | Social/Behavioral Elective or History | 3 |
| MAT 2613** | MA 227 Calculus III | 3 (USA 4) |
| PHY 2524 | PH 202/202L Calculus-Based Physics II & Lab | 4 |
| MAT 2113 | MA 237 Linear Algebra | 3 |
| Total | 17 |
Spring Semester - Year 2
| MGCCC Course Name | USA Course Name | Credit Hours |
|---|---|---|
| Fine Arts Elective | Fine Arts Elective | 3 |
| MAT 2623** | Calculus IV | 3 **Sequence complete |
| MAT 2913 | MA 238 Differential Equations | 3 |
| BIO 1134* | BLY 121/121L General Biology* | 4 |
| EGR 2413 | EG 283 Statics | 3 |
| Total | 16 |
*Science Elective Requirement; BIO 103 recommended (USA Course Codes: BLY 121, CH 132, GY 111, PH 303, ST 315, MA 316, MA 254 or MA 437)
**MGCCC Calculus courses are 3 credits each. Must complete Calculus I-IV for a total of 12 hours.
Plan to transfer for the summer semester to complete EG 284 Dynamics (EGR 2433) and EG 315 Mechanics of Materials (no offered at MGCCC) (unless MGCCC if offering these courses in the summer)
Fall Semester - Year 3
| USA Course Name | Course Description | Pre-requisite | Credit Hours |
|---|---|---|---|
| EG 220 | Electrical Circuits | MA 126 and PH 202 (min grade of C) | 3 |
| EG 270 | Engineering Thermodynamics | MA 126 (min grade of C) | 3 |
| ME 228 | Introduction to Comp | MA 237 | 3 |
| EG 231 | Engineering Ethics & Economics | MA 126 | 3 |
| Technical Elective | Technical Elective | 3 | |
| Total | 15 |
Spring Semester - Year 3
| USA Course Name | Course Description | Pre-requisite | Credit Hours |
|---|---|---|---|
| EG/ME 360 | Fluid Mechanics | MA 238 and EG 284 (min grade of C) | 3 |
| ME 314 | Machine Component Design | EG 284 and EG 315 | 3 |
| ME 316 | Instrumentation | EG 220 (min grade of C) | 3 |
| ME 326 | Materials Science | PH 202, CH 131 and EG 315 (min grade of C) | 3 |
| ME 336 | Materials Science Lab | PH 202, CH 131 and EG 315 (min grade of C) | 1 |
| ME 328 | Mechanical Analysis | MA 227, MA 237 and MA 238 (min grade of C) | 4 |
| Total | 17 |
Fall Semester - Year 4
| USA Course Name | Course Description | Pre-requisite | Credit Hours |
|---|---|---|---|
| ME 312 | Mechanical Engineering Thermodynamics | EG 270 | 3 |
| ME 317 | Heat Transfer | EG/ME 360, ME 328 | 3 |
| ME 336 | Mat'l Sci Lab | ME 326 | 1 |
| ME 410 | Principles of Engineering Design | ME 314 and EG 231 | 3 |
| ME 426 | Controls | ME 316 | 3 |
| Total | 13 |
Spring Semester - Year 4
| USA Course Name | Course Description | Pre-requisite | Credit Hours |
|---|---|---|---|
| ME 429 | Controls and Instrument Lab | ME 426 (can be taken concurrently) | 1 |
| ME 414 | Capstone Design | ME 410 | 1 |
| ME 416 | Capstone Design Project | ME 410 | 2 |
| ME 472 | Vibration Analysis and Synthesis | EG 284, EG 315 and ME 328 | 3 |
| ME Elective | See notes below *** | 3 | |
| Tech Elec or ME Elec | See notes ** and *** | 3 | |
| Total | 17 |
ME and/or Technical Electives can be selected from below or can be courses for the Aerospace or Biomedical concentrations
** BLY 122, CH 201, CH 202, GY 305, GY 310, PH 303, EG 480, ST 315, ST 320, MA 316, MA 332, MA 334, MA 335, MA 354, MA 436 or MA 437
*** ME 411, ME 419, ME 421, ME 422, ME 431, ME 432, ME 438, ME 441, ME 450, ME 451,
ME 453, ME 466-470, ME 490 or ME 494.